У меня свежая установка последней версии centos 7
[root@localhost ~]# cat /etc/centos-release
CentOS Linux release 7.4.1708 (Core)
[root@localhost ~]#
Я хотел что-то установить и wget не был установлен, поэтому, когда я попытался установить wget, я увидел, что yum выдает ошибку.
Я видел, возможно, все темы об этой проблеме в Интернете, но не повезло, я не могу найти свое решение.
[root@localhost ~]# yum update
Loaded plugins: fastestmirror
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirror.centos.org; Unknown error"
Trying other mirror.
One of the configured repositories failed (CentOS-7 - Base),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=base ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable base
or
subscription-manager repos --disable=base
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=base.skip_if_unavailable=true
failure: repodata/repomd.xml from base: [Errno 256] No more mirrors to try.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirror.centos.org; Unknown error"
[root@localhost ~]#
Итак, когда я перечисляю репозитории я получаю следующее:
[root@localhost ~]# yum repolist all
Loaded plugins: fastestmirror
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirror.centos.org; Unknown error"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirror.centos.org; Unknown error"
Trying other mirror.
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=centosplus&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
http://mirror.centos.org/centos/7/centosplus/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirror.centos.org; Unknown error"
Trying other mirror.
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=extras&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
http://mirror.centos.org/centos/7/extras/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirror.centos.org; Unknown error"
Trying other mirror.
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=updates&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
http://mirror.centos.org/centos/7/updates/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirror.centos.org; Unknown error"
Trying other mirror.
repo id repo name status
C7.0.1406-base/x86_64 CentOS-7.0.1406 - Base disabled
C7.0.1406-centosplus/x86_64 CentOS-7.0.1406 - CentOSPlus disabled
C7.0.1406-extras/x86_64 CentOS-7.0.1406 - Extras disabled
C7.0.1406-fasttrack/x86_64 CentOS-7.0.1406 - CentOSPlus disabled
C7.0.1406-updates/x86_64 CentOS-7.0.1406 - Updates disabled
C7.1.1503-base/x86_64 CentOS-7.1.1503 - Base disabled
C7.1.1503-centosplus/x86_64 CentOS-7.1.1503 - CentOSPlus disabled
C7.1.1503-extras/x86_64 CentOS-7.1.1503 - Extras disabled
C7.1.1503-fasttrack/x86_64 CentOS-7.1.1503 - CentOSPlus disabled
C7.1.1503-updates/x86_64 CentOS-7.1.1503 - Updates disabled
C7.2.1511-base/x86_64 CentOS-7.2.1511 - Base disabled
C7.2.1511-centosplus/x86_64 CentOS-7.2.1511 - CentOSPlus disabled
C7.2.1511-extras/x86_64 CentOS-7.2.1511 - Extras disabled
C7.2.1511-fasttrack/x86_64 CentOS-7.2.1511 - CentOSPlus disabled
C7.2.1511-updates/x86_64 CentOS-7.2.1511 - Updates disabled
C7.3.1611-base/x86_64 CentOS-7.3.1611 - Base disabled
C7.3.1611-centosplus/x86_64 CentOS-7.3.1611 - CentOSPlus disabled
C7.3.1611-extras/x86_64 CentOS-7.3.1611 - Extras disabled
C7.3.1611-fasttrack/x86_64 CentOS-7.3.1611 - CentOSPlus disabled
C7.3.1611-updates/x86_64 CentOS-7.3.1611 - Updates disabled
base/7/x86_64 CentOS-7 - Base enabled: 0
base-debuginfo/x86_64 CentOS-7 - Debuginfo disabled
base-source/7 CentOS-7 - Base Sources disabled
c7-media CentOS-7 - Media disabled
centosplus/7/x86_64 CentOS-7 - Plus enabled: 0
centosplus-source/7 CentOS-7 - Plus Sources disabled
cr/7/x86_64 CentOS-7 - cr disabled
extras/7/x86_64 CentOS-7 - Extras enabled: 0
extras-source/7 CentOS-7 - Extras Sources disabled
fasttrack/7/x86_64 CentOS-7 - fasttrack disabled
updates/7/x86_64 CentOS-7 - Updates enabled: 0
updates-source/7 CentOS-7 - Updates Sources disabled
repolist: 0
[root@localhost ~]#
Я не уверен, где может быть проблема, это новая установка на моем выделенном сервере vmware / OVH.
У меня установлен еще один сервер, который работает нормально, но на этот раз у меня возникла эта проблема.
Кто-нибудь может мне помочь? Я также попытался включить все отключенные строки в etc / yum.repo.d
my /etc/yum.repos.d/CentOS-Base.repo[12258 impression
Could not resolve host: mirrorlist.centos.org; Unknown error
Это означает, что у вас либо (а) нет правильно настроенного DNS-сервера, либо (б) ваша сетевая конфигурация неверна, и вы не можете подключиться к DNS-серверу для проверки имя хоста mirrorlist.centos.org
.
Попробуйте использовать ping 8.8.8.8
. Если это не удается, попробуйте ping
. Если и это не помогло, конфигурация вашей локальной сети неверна, и вам придется ее проверить.
Если вы можете проверить связь с 8.8.8.8
, попробуйте использовать хост
, ] nslookup
или dig
, чтобы проверить настройки DNS, например host google.com
или dig google.com
. Если это не удается, вам необходимо проверить настройки DNS. Проверьте /etc/resolv.conf
, чтобы узнать, что настроено.
ОБНОВЛЕНИЕ
Поскольку /etc/resolv.conf
пусто, вам необходимо настроить преобразователь DNS. Я бы посоветовал ввести следующее в файл, используя nano
или vi
(или как вам удобно):
nameserver 9.9.9.9
Сохраните этот файл, затем попробуйте yum update
снова.
Вы также можете попробовать другие хосты DNS, если хотите, например 8.8.8.8
или 8.8.4.4
или любой из OpenDNS хосты.
Где-то у вас может быть проблема с подключением, вот небольшой процесс, чтобы проверить, где у вас проблема.
Проверьте, есть ли у сервера Интернет (IP-адрес и правильный маршрут - если не работает, проверьте с помощью ip-адреса
, есть ли у вас IP-адрес).
ping 8.8.8.8
Проверьте, что это за резолвер, и пингуйте их
cat /etc/resolv.conf
У вас должна быть строка с сервером имен
и IP-адрес. Убедитесь, что IP отвечает.
ping xx.xx.xx.xx
Затем выполните nslookup
nslookup mirrorlist.centos.org
Он должен вернуть список IP-адресов. В противном случае ваш DNS-сервер может работать некорректно, вы можете попробовать другой сервер с
nslookup
> server 8.8.8.8
> mirrorlist.centos.org
и проверить, что на этот раз он работает должным образом.