После изменения размеров зашифрованного устройства LVM машина занимает 4 часа для начальной загрузки

У меня есть хост под Хрипящим Debian.

Программное обеспечение виртуализации является qemu/KVM и использует Объемы LVM в качестве дисков для гостей.

Гости все были установлены с помощью debian хрипящее, полное шифрование диска, LVM (/начальная загрузка вне устройства удач, LVM, разделены на/, / домой, подкачка).

Два раза я должен был изменить размер диска для гостя с желанием вырастить / домашний объем гостя.

То, что я сделал, было:

• Выключите машину
• От хоста вырастите гостя объем LVM
• От debian-cd1 загружают гостевую машину, с rescue/enable=true как дополнительный параметр начальной загрузки.
• От той живой системы, chroot в гостевую систему (необходимый пароль)
• От этого chroot, cryptsetup изменяют размер
• Все еще в chroot, измените размер файловой системы
• обновление-initramfs

И затем я перезагружаю машину (после того, как правильно размонтированное и закрытое устройство объемов и удач), и требуется несколько часов прежде, чем попросить у меня пароля.

Если кто-либо когда-либо испытывал это или знает об этой проблеме, что-то, что я действительно неправильно или так, сообщаю мне!

Вот журнал dmesg с прошлого раза:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.63-2
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/srvices-root ro single console=tty0 console=ttyS0,115200
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000dfffe000 (usable)
[    0.000000]  BIOS-e820: 00000000dfffe000 - 00000000e0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 00000001a0000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x1a0000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00E0000000 mask FFE0000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xdfffe max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fdad0] fdad0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000dfffe000
[    0.000000]  0000000000 - 00dfe00000 page 2M
[    0.000000]  00dfe00000 - 00dfffe000 page 4k
[    0.000000] kernel direct mapping tables up to dfffe000 @ 1fffa000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-00000001a0000000
[    0.000000]  0100000000 - 01a0000000 page 2M
[    0.000000] kernel direct mapping tables up to 1a0000000 @ dfffa000-dfffe000
[    0.000000] RAMDISK: 369a4000 - 374ca000
[    0.000000] ACPI: RSDP 00000000000fd920 00014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 00000000dfffe550 00038 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 00000000dfffff80 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 00000000dfffe590 01121 (v01   BXPC   BXDSDT 00000001 INTL 20100528)
[    0.000000] ACPI: FACS 00000000dfffff40 00040
[    0.000000] ACPI: SSDT 00000000dffffe40 000FF (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 00000000dffffd50 00080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 00000000dffffd10 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: SSDT 00000000dffff6c0 00644 (v01   BXPC BXSSDTPC 00000001 INTL 20100528)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-00000001a0000000
[    0.000000] Initmem setup node 0 0000000000000000-00000001a0000000
[    0.000000]   NODE_DATA [000000019fffb000 - 000000019fffffff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:16a9701, boot clock
[    0.000000]  [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff880199600000-ffff88019ebfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x001a0000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000dfffe
[    0.000000]     0: 0x00100000 -> 0x001a0000
[    0.000000] On node 0 totalpages: 1572747
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 899126 pages, LIFO batch:31
[    0.000000]   Normal zone: 8960 pages used for memmap
[    0.000000]   Normal zone: 646400 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000dfffe000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000feffc000
[    0.000000] PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000
[    0.000000] PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1effc000)
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88019fc00000 s82944 r8192 d23552 u1048576
[    0.000000] pcpu-alloc: s82944 r8192 d23552 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] kvm-clock: cpu 0, msr 1:9fc13701, primary cpu clock
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 19fc0dfc0
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1549446
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/srvices-root ro single console=tty0 console=ttyS0,115200
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 6116684k/6815744k available (3432k kernel code, 524756k absent, 174304k reserved, 3307k data, 580k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Detected 3415.532 MHz processor.
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.008000] Calibrating delay loop (skipped) preset value.. 6831.06 BogoMIPS (lpj=13662128)
[    0.008000] pid_max: default: 32768 minimum: 301
[    0.008000] Security Framework initialized
[    0.008000] AppArmor: AppArmor disabled by boot time parameter
[    0.008000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.012000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.015249] Mount-cache hash table entries: 256
[    0.016170] Initializing cgroup subsys cpuacct
[    0.017500] Initializing cgroup subsys memory
[    0.018775] Initializing cgroup subsys devices
[    0.020011] Initializing cgroup subsys freezer
[    0.021356] Initializing cgroup subsys net_cls
[    0.022698] Initializing cgroup subsys blkio
[    0.024016] Initializing cgroup subsys perf_event
[    0.025383] mce: CPU supports 10 MCE banks
[    0.029219] ACPI: Core revision 20110623
[    0.033372] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.035377] CPU0: AMD QEMU Virtual CPU version 1.1.2 stepping 03
[    0.040002] APIC calibration not consistent with PM-Timer: 116ms instead of 100ms
[    0.040002] APIC delta adjusted to PM-Timer: 6249547 (7253497)
[    0.040002] Performance Events: Broken PMU hardware detected, using software events only.
[    0.040002] NMI watchdog disabled (cpu0): hardware events not enabled
[    0.040121] Booting Node   0, Processors  #1 Ok.
[    0.041284] smpboot cpu 1: start_ip = 98000
[    0.053431] NMI watchdog disabled (cpu1): hardware events not enabled
[    0.053428] KVM setup async PF for cpu 1
[    0.053428] kvm-stealtime: cpu 1, msr 19fd0dfc0
[    0.053428] kvm-clock: cpu 1, msr 1:9fd13701, secondary cpu clock
[    0.060005] Brought up 2 CPUs
[    0.068011] Total of 2 processors activated (13662.12 BogoMIPS).
[    0.069677] devtmpfs: initialized
[    0.074798] print_constraints: dummy: 
[    0.076177] NET: Registered protocol family 16
[    0.077716] ACPI: bus type pci registered
[    0.079085] PCI: Using configuration type 1 for base access
[    0.080210] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.081863] mtrr: your CPUs had inconsistent MTRRdefType settings
[    0.084006] mtrr: probably your BIOS does not setup all CPUs.
[    0.085652] mtrr: corrected configuration.
[    0.088260] bio: create slab  at 0
[    0.089632] ACPI: Added _OSI(Module Device)
[    0.092010] ACPI: Added _OSI(Processor Device)
[    0.093576] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.096015] ACPI: Added _OSI(Processor Aggregator Device)
[    0.098360] ACPI: EC: Look up EC in DSDT
[    0.100581] ACPI: Interpreter enabled
[    0.102354] ACPI: (supports S0 S3 S4 S5)
[    0.104014] ACPI: Using IOAPIC for interrupt routing
[    0.113888] ACPI: No dock devices found.
[    0.115411] HEST: Table not found.
[    0.116017] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.118877] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.120055] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.120057] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.120059] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.120061] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
[    0.120094] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[    0.120330] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[    0.120657] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[    0.122297] pci 0000:00:01.1: reg 20: [io  0xc0a0-0xc0af]
[    0.124442] pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
[    0.126058] pci 0000:00:01.2: reg 20: [io  0xc040-0xc05f]
[    0.126769] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[    0.127047] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[    0.128016] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[    0.129795] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
[    0.132504] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
[    0.136052] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff]
[    0.141073] pci 0000:00:02.0: reg 30: [mem 0xfebd0000-0xfebdffff pref]
[    0.141386] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
[    0.148589] pci 0000:00:03.0: reg 10: [io  0xc060-0xc07f]
[    0.149632] pci 0000:00:03.0: reg 14: [mem 0xfebf1000-0xfebf1fff]
[    0.156542] pci 0000:00:03.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
[    0.156956] pci 0000:00:04.0: [1af4:1001] type 0 class 0x000100
[    0.158142] pci 0000:00:04.0: reg 10: [io  0xc000-0xc03f]
[    0.159248] pci 0000:00:04.0: reg 14: [mem 0xfebf2000-0xfebf2fff]
[    0.164887] pci 0000:00:05.0: [1af4:1002] type 0 class 0x0000ff
[    0.165458] pci 0000:00:05.0: reg 10: [io  0xc080-0xc09f]
[    0.169256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.169685]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.174231] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.176076] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.180978] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.184072] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.185535] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[    0.187291] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.188014] vgaarb: loaded
[    0.188596] vgaarb: bridge control possible 0000:00:02.0
[    0.189569] PCI: Using ACPI for IRQ routing
[    0.190306] PCI: pci_cache_line_size set to 64 bytes
[    0.190443] reserve RAM buffer: 000000000009dc00 - 000000000009ffff 
[    0.190448] reserve RAM buffer: 00000000dfffe000 - 00000000dfffffff 
[    0.190645] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.192034] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.193147] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.212036] Switching to clocksource kvm-clock
[    0.214927] pnp: PnP ACPI init
[    0.215592] ACPI: bus type pnp registered
[    0.216366] pnp 00:00: [bus 00-ff]
[    0.216369] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.216371] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.216372] pnp 00:00: [io  0x0d00-0xffff window]
[    0.216374] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.216376] pnp 00:00: [mem 0xe0000000-0xfebfffff window]
[    0.216426] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.216440] pnp 00:01: [io  0x0070-0x0071]
[    0.216472] pnp 00:01: [irq 8]
[    0.216473] pnp 00:01: [io  0x0072-0x0077]
[    0.216492] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.216526] pnp 00:02: [io  0x0060]
[    0.216529] pnp 00:02: [io  0x0064]
[    0.216545] pnp 00:02: [irq 1]
[    0.216564] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.216594] pnp 00:03: [irq 12]
[    0.216613] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.216633] pnp 00:04: [io  0x03f2-0x03f5]
[    0.216635] pnp 00:04: [io  0x03f7]
[    0.216650] pnp 00:04: [irq 6]
[    0.216652] pnp 00:04: [dma 2]
[    0.216683] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.216750] pnp 00:05: [io  0x03f8-0x03ff]
[    0.216766] pnp 00:05: [irq 4]
[    0.216784] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.216878] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[    0.216906] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.217005] pnp: PnP ACPI: found 7 devices
[    0.217730] ACPI: ACPI bus type pnp unregistered
[    0.228506] PCI: max bus depth: 0 pci_try_num: 1
[    0.228515] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.228517] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffff]
[    0.228705] NET: Registered protocol family 2
[    0.231459] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.235819] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.250779] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.253381] TCP: Hash tables configured (established 524288 bind 65536)
[    0.255193] TCP reno registered
[    0.256172] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.257857] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.259902] NET: Registered protocol family 1
[    0.260861] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.262056] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.263174] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.273610] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.275164] pci 0000:00:02.0: Boot video device
[    0.275194] PCI: CLS 0 bytes, default 64
[    0.275261] Unpacking initramfs...
[    0.477514] Freeing initrd memory: 11416k freed
[    0.482711] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.484075] Placing 64MB software IO TLB between ffff8800dbffa000 - ffff8800dfffa000
[    0.485685] software IO TLB at phys 0xdbffa000 - 0xdfffa000
[    0.487886] audit: initializing netlink socket (disabled)
[    0.489023] type=2000 audit(1414446944.488:1): initialized
[    0.507853] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.512541] VFS: Disk quotas dquot_6.5.2
[    0.513981] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.516081] msgmni has been set to 11968
[    0.518658] alg: No test for stdrng (krng)
[    0.522396] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.525107] io scheduler noop registered
[    0.526139] io scheduler deadline registered
[    0.527797] io scheduler cfq registered (default)
[    0.529671] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.547796] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.549695] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.551777] acpiphp: Slot [3] registered
[    0.553206] acpiphp: Slot [4] registered
[    0.554527] acpiphp: Slot [5] registered
[    0.555406] acpiphp: Slot [6] registered
[    0.556338] acpiphp: Slot [7] registered
[    0.557273] acpiphp: Slot [8] registered
[    0.558229] acpiphp: Slot [9] registered
[    0.559134] acpiphp: Slot [10] registered
[    0.560029] acpiphp: Slot [11] registered
[    0.560925] acpiphp: Slot [12] registered
[    0.561909] acpiphp: Slot [13] registered
[    0.562938] acpiphp: Slot [14] registered
[    0.564249] acpiphp: Slot [15] registered
[    0.565569] acpiphp: Slot [16] registered
[    0.566820] acpiphp: Slot [17] registered
[    0.568191] acpiphp: Slot [18] registered
[    0.569475] acpiphp: Slot [19] registered
[    0.570820] acpiphp: Slot [20] registered
[    0.572144] acpiphp: Slot [21] registered
[    0.573376] acpiphp: Slot [22] registered
[    0.574658] acpiphp: Slot [23] registered
[    0.575989] acpiphp: Slot [24] registered
[    0.577173] acpiphp: Slot [25] registered
[    0.578425] acpiphp: Slot [26] registered
[    0.579739] acpiphp: Slot [27] registered
[    0.580980] acpiphp: Slot [28] registered
[    0.582278] acpiphp: Slot [29] registered
[    0.583573] acpiphp: Slot [30] registered
[    0.584773] acpiphp: Slot [31] registered
[    0.586223] ERST: Table is not found!
[    0.587312] GHES: HEST is not enabled!
[    0.588856] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.629003] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.658059] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.660565] Linux agpgart interface v0.103
[    0.673119] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.677148] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.678248] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.679836] mousedev: PS/2 mouse device common for all mice
[    0.681944] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.684831] rtc_cmos 00:01: RTC can wake from S4
[    0.686732] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.688777] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    0.690651] cpuidle: using governor ladder
[    0.691951] cpuidle: using governor menu
[    0.693583] TCP cubic registered
[    0.694984] NET: Registered protocol family 10
[    0.697245] Mobile IPv6
[    0.698222] NET: Registered protocol family 17
[    0.709844] Registering the dns_resolver key type
[    0.714300] PM: Hibernation image not present or could not be loaded.
[    0.714348] registered taskstats version 1
[    0.720212] rtc_cmos 00:01: setting system clock to 2014-10-27 21:55:43 UTC (1414446943)
[    0.724133] Initializing network drop monitor service
[    0.726898] Freeing unused kernel memory: 580k freed
[    0.727988] Write protecting the kernel read-only data: 6144k
[    0.730894] Freeing unused kernel memory: 648k freed
[    0.734594] Freeing unused kernel memory: 688k freed
[    0.856102] udevd[51]: starting version 175
[    0.882389] SCSI subsystem initialized
[    0.887544] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[    0.902570] usbcore: registered new interface driver usbfs
[    0.902753] virtio-pci 0000:00:03.0: setting latency timer to 64
[    0.903451] virtio-pci 0000:00:04.0: setting latency timer to 64
[    0.904180] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    0.904217] virtio-pci 0000:00:05.0: setting latency timer to 64
[    0.908345] libata version 3.00 loaded.
[    0.908908] ata_piix 0000:00:01.1: version 2.13
[    0.909051] ata_piix 0000:00:01.1: setting latency timer to 64
[    0.912461] usbcore: registered new interface driver hub
[    0.916405] scsi0 : ata_piix
[    0.920989] usbcore: registered new device driver usb
[    0.923162] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.925064] scsi1 : ata_piix
[    0.926215] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
[    0.928003] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
[    0.930726] uhci_hcd: USB Universal Host Controller Interface driver
[    0.933881] uhci_hcd 0000:00:01.2: setting latency timer to 64
[    0.933890] uhci_hcd 0000:00:01.2: UHCI Host Controller
[    0.935462] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[    0.937756] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040
[    0.939465] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    0.941008] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.942864] usb usb1: Product: UHCI Host Controller
[    0.944217] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.945600] usb usb1: SerialNumber: 0000:00:01.2
[    0.947218] hub 1-0:1.0: USB hub found
[    0.948370] hub 1-0:1.0: 2 ports detected
[    0.958914] virtio-pci 0000:00:03.0: irq 40 for MSI/MSI-X
[    0.958937] virtio-pci 0000:00:03.0: irq 41 for MSI/MSI-X
[    0.958954] virtio-pci 0000:00:03.0: irq 42 for MSI/MSI-X
[    0.971100] virtio-pci 0000:00:04.0: irq 43 for MSI/MSI-X
[    0.971120] virtio-pci 0000:00:04.0: irq 44 for MSI/MSI-X
[    0.971579] FDC 0 is a S82078B
[    0.973380]  vda: vda1 vda2 
[    1.101935] ata2.01: NODEV after polling detection
[    1.102793] ata2.00: ATAPI: QEMU DVD-ROM, 1.1.2, max UDMA/100
[    1.109793] ata2.00: configured for MWDMA2
[    1.115456] scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     1.1. PQ: 0 ANSI: 5
[    1.148087] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.149401] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.151382] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.158778] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    1.260227] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    1.302176] device-mapper: uevent: version 1.0.3
[    1.307903] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.456752] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
[    1.456755] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
[    1.456757] usb 1-1: Product: QEMU USB Tablet
[    1.456759] usb 1-1: Manufacturer: QEMU 1.1.2
[    1.456760] usb 1-1: SerialNumber: 42
[    1.485089] input: QEMU 1.1.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input1
[    1.485328] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 1.1.2 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[    1.485378] usbcore: registered new interface driver usbhid
[    1.485384] usbhid: USB HID core driver
[ 6308.594031] PM: Starting manual resume from disk
[ 6308.607186] PM: Hibernation image partition 253:2 present
[ 6308.607188] PM: Looking for hibernation image.
[ 6308.607520] PM: Image not found (code -22)
[ 6308.607522] PM: Hibernation image not present or could not be loaded.
[ 6308.684653] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 6310.590145] udevd[372]: starting version 175
[ 6310.869309] WARNING! power/level is deprecated; use power/control instead
[ 6310.917370] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 6310.938347] ACPI: Power Button [PWRF]
[ 6311.083046] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[ 6311.105034] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6311.523064] Error: Driver 'pcspkr' is already registered, aborting...
[ 6311.779350] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 6312.487542] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 6312.775121] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 6313.573035] loop: module loaded
[ 6314.543459] Adding 8519676k swap on /dev/mapper/srvices-swap_1.  Priority:-1 extents:1 across:8519676k 
[ 6326.584149] eth0: no IPv6 routers present