Гипервизор 5 VMware vSphere с Intel SPL 5000 в Набеге 0 никаких начальных загрузок от DVD?

Alright. Thanks for the input guys. I have "solved" the problem. Well not actively, but passively.

First, I tried to update the firmware, however, I did not succeed since I could not run the bat files form a bootable DOS pendrive with the firmware on.

Second, I tried to install directly from my pen drive, that did not work either, I got "Remove Media or restart" error.

Lastly, I decided to do a PXE install, which I would recommend and I think its the best thing to do nowadays, especially if you have a full Gigabit Network setup (switch, cat6/5e and ethernet).

I did not want to do this from my dual-boot linux client, so I decided I stay in my Windows 7 ultimate 64bit. First I disconnected myself from the network so that none of my PCs gets an IP assigned by a shitty ISP router.

Then I used " tftp32 by PH. Jounin. I added the service to my firewall and downloaded PXELinux from Syslinux and used the pxelinux.0 kernel and created a menulist named default in my pxelinux.cfg folder which were all located in my root directory of my tftp service. I configured the DHCP service on my computer and monitored everything with Wireshark, however, the tftp32 application gives you a pretty good log of the network activity as well, however it is a bit difficult to differentiate between the single log lines, so I prefered keeping wireshark since the coloured packet information. It took the server quite a while to negoiate the ip from my pc, however, everything worked out.

The ESXi 5.0 has been successfully installed. However, it did not recognize the virtual disk and asked me to use one of the physical disks on my server.