Определение состояния SMART дисков SATA в HP SmartArray
Я пытаюсь найти параметры SMART дисков в моем массиве, кажется, что простой способ делает не работает:
% smartctl -d sat --all /dev/sg0 -H
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-8-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported scsi opcode
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
root@wrzos ~ % smartctl -d sat -T permissive -T permissive --all /dev/sg0 -H
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-8-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported scsi opcode
=== START OF INFORMATION SECTION ===
Device Model: [No Information Found]
Serial Number: [No Information Found]
Firmware Version: [No Information Found]
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: [No Information Found]
Local Time is: Tue Jan 29 15:32:21 2019 CET
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Unknown - Try option -s with argument 'on' to enable it.
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
% smartctl -d scsi --all /dev/sg0 -H
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-8-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: HP
Product: P410
Revision: 6.40
Serial number: 111111111111
Device type: storage array
Local Time is: Tue Jan 29 15:29:34 2019 CET
SMART support is: Unavailable - device lacks SMART capability.
Есть ли другой способ запросить статус этих (SATA) дисков?
1
задан LetMeSOThat4U
29 January 2019 в 16:31
Ссылка
2 ответа
Вам не нужно использовать smartctl с серверами HP.
У HP есть специальные инструменты для этого, поэтому ssacli и ssaducli были бы наиболее полезными.
https://downloads.linux.hpe.com/SDR/project/mcp/
Чтобы получить статус массива, например, ssacli ctrl all show config detail предоставит это.
1
Вы можете сделать
smartctl -a -l ssd /dev/sda -d cciss,1
или
smartctl -a -l ssd /dev/sda -d sat+cciss,1
вы можете подсчитать последнее число, а затем вверх, чтобы выбрать новый жесткий диск.
это приведет к:
root@pve:~# smartctl -a -l ssd /dev/sda -d cciss,1
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.44-2-pve] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 840 EVO 1TB
Serial Number: S1D9NAADA00000W
LU WWN Device Id: 5 002538 85006hd19
Firmware Version: EXT0BB0Q
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Sep 21 13:38:26 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (15000) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 250) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 40839
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 47
177 Wear_Leveling_Count 0x0013 059 059 000 Pre-fail Always - 496
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 078 048 000 Old_age Always - 22
195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0
199 CRC_Error_Count 0x003e 099 099 000 Old_age Always - 21
235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 46
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 187862960327
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Device Statistics (GP/SMART Log 0x04) not supported
4
ответ дан Community
21 September 2020 в 11:41
Ссылка