HP ProLiant 360 G4 зависает на Агенте загрузки Ethernet
Это - вероятно, DNS, еще не ловя до изменения. Это раньше занимало до 72 часов в прошлом, но является несколькими часами в эти дни для изменений DNS для создания его вокруг всех различных серверов DNS.
Have you tried resetting the BIOS? You may need to pull the CMOS battery if you can't get into the BIOS at all.
Get the last firmware CD from HP and make certain to upgrade everything if you have not already. This server was retired in March of 2006 so using the latest and greatest Smart Start/Firmware downloads from HP may not work for you.
This is the 8.60 firmware link: http://bizsupport1.austin.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=397638&swItem=MTX-124beffbed3842cea0b9b3f962&prodNameId=3288140&swEnvOID=2026&swLang=8&taskId=135&mode=4&idx=1
you are not stating which O/S or 32/64 bit so make certain you get the smart start that pertains to your needs. They can be found under the Drivers and software link on the left on this page.
Also, your raid controller may have failed. There are 5 or so different RAID controllers for that machine. The 6i being the base card. If you run the firmware CD/DVD it will honk if it does not see the RAID controller.
Hope this helps